SeaStar Helms

HELMS

The helm pump is the heart of the hydraulic steering system. SeaStar & SeaStar Pro helm pumps are the product of many years of research and experience by the world's foremost builder of manual hydraulic steering systems. Our efforts have resulted in a design which represents the ultimate in efficiency, safety and reliability, yet is easy to install and maintain. Superior design, teamed with the finest materials, precision manufacturing and rigid quality control all add up to an outstanding product which is certain to set industry standards for years to come.

Unmatched comfort and control. Only with SeaStar Steering. The worlds most popular hydraulic steering system – offering smooth super efficient No Feedback Steering for single and twin engine non power assisted outboard engines up to 350Hp (600HP combined for counter rotating twins) for speeds up to 60 MPH.

(Designed for the Performance Boater)SeaStar Pro is the ultimate steering system for high-speed single engine outboards. As the Premier Teleflex No Feedback System, SeaStar Pro delivers uncompromising steering control! Suited for all those critical high speed outboard powered boat applications like Bass, Flats, Combo Race and Ski, and other performance boats capable of speeds in excess of 60 MPH. SeaStar PRO has steered the Bass Masters since 1994 and it's the choice of high performance outboard boat builders.

For Commercial and Work Boat applications over 38ft. (11.5m) and larger Pleasure Boats please refer to our range of Capilano helms and Inboard Steering Systems.

Standard Helm Features

Compact, stylish design.
Available in 1.7, 2.0 and 2.4 cubic inch displacements.
Convenient front of dash fill.
Small 3.0" hole cutout on dash.
Can be retrofitted into old SeaStar 4.5" hole cutout. Part# HA5418
Complete with elbow fittings.

	[Dimensions and Accessories]

	[Installation Manual]

Rear Mount Helm Features

Behind dash mounting configuration.
Available in 1.4, 1.7 and 2.4 cubic inch displacements.
Top of dash fill point.
Complete with elbow fittings.

(Contact Teleflex for Availability)

[Dimensions]

[Installation Manual]

Sport Tilt Helm Features

Newly designed Tilt Mechanism.
5 wheel positions allow adjustment to most comfortable steering position.
48 degree tilt range (12 down - 36 up).
Available in 1.7, 2.0 and 2.4 cubic inch displacements.
Remote fill point.
Complete with elbow fittings.

	[Dimensions]

	[Installation Manual]

Traditional Tilt Helm Features

5 wheel positions allow adjustment to most comfortable steering position.
48 degree tilt range (18 down - 30 up).
Available in 1.7, 2.0 and 2.4 cubic inch displacements.
Convenient front of dash fill.
Complete with elbow fittings.

	[Dimensions]

	[Installation Manual]

Features Common to all SeaStar Helms

Helm rotor supported by three roller bearings.
Ball bearing piston race.
Field replaceable shaft seal.
1/4" NPT ports.
Built-in lock valve for positive rudder lock.
Patented bleed tubes.
Internal air pocket eliminates oil expansion overflow.
Integral relief valve.

Order Guide

HELM DESCRIPTION

PART NO.

DISPLACEMENT

RELIEF VALVE SETTING

Cu.In./Rev

(cc/Rev)

PSI

(BAR)

*SEASTAR 1.7–STANDARD MOUNT
*SEASTAR 2.4–STANDARD MOUNT
*SEASTAR 2.0–STANDARD MOUNT
SEASTAR PRO–STANDARD MOUNT
SEASTAR 1.7–TILT
SEASTAR 2.4–TILT
SEASTAR PRO–TILT
SEASTAR 1.4–REAR MOUNT
SEASTAR 1.7–REAR MOUNT
SEASTAR 2.4–REAR MOUNT
SEASTAR 1.7–SPORT TILT
SEASTAR 2.0–SPORT TILT PRO
SEASTAR 2.4–SPORT TILT
*SEASTAR 1.7–COMMERCIAL, STD. MOUNT
*SEASTAR 2.4–COMMERCIAL, STD. MOUNT
NEW SEASTAR 2.0–SPORT PLUS TILT (Spline Shaft)
NEW SEASTAR 1.7–SPORT PLUS TILT (Spline Shaft)
NEW SEASTAR 2.4–SPORT PLUS TILT (Spline Shaft)
NEW SEASTAR 2.0–SPORT PLUS TILT
NEW SEASTAR PRO 1.7–SPORT PLUS TILT
NEW SEASTAR PRO 2.0–SPORT PLUS TILT
NEW SEASTAR 1.7–SPORT PLUS TILT
NEW SEASTAR 2.4–SPORT PLUS TILT

HH5271
HH5272
HH5273
HH5770
HH5741
HH5742
HH5774
HH5260
HH5261
HH5262
HH6191
HH6190
HH6192
HH5217
HH5224
HH6345
HH6391
HH6392
HH6445
HH6489
HH6490
HH6491
HH6492

1.7
2.4
2.0
2.0
1.7
2.4
2.0
1.4
1.7
2.4
1.7
2.0
2.4
1.7
2.4
2.0
1.7
2.4
2.0
1.7
2.0
1.7
2.4

27.8
39.3
32.8
32.8
27.8
39.3
32.8
23.0
27.8
39.3
27.8
33.0
39.3
27.8
39.3
33.0
27.8
39.3
33.0
27.8
33.0
27.8
39.4

1000
1000
1000
1500
1000
1000
1500
1000
1000
1000
1000
1500
1000
1000
1000
1000
1000
1000
1000
1500
1500
1000
1000

70
70
70
103
70
70
103
70
70
70
70
103
70
70
70
70
70
70
70
103
103
70
70

*OPTIONAL EQUIPMENT

BACK PLATE
20 DEGREE WEDGE
ROUND BEZEL KIT

HA5418
HA5419
HA5478

Commercial Helms

Part# HH5217, HH5224

Specifically designed to be used on smaller fishing vessels involved in the Lobster and Crabbing Industries. The Commercial Helm Pumps are designed with a stainless steel shaft and heavy duty shaft seal and wiper. This new shaft and seal help protect the Helm Pump from the abrasive effects of sediment that is brought on board by the operator handling Traps or Pots.

For Commercial Use ONLY.